How to Easily Remove Hair from Your Shower Drain
Struggling with clogged drains? Discover how to easily remove hair from your shower drain with this step-by-step guide. Keep your drains clean and your showers flowing smoothly!
There’s nothing worse than standing in a puddle of water during your shower, realizing that the water’s just not draining like it used to. The culprit? Hair. It’s the silent clogger that slowly builds up in your drain until it creates a mini-flood in your bathroom. Whether it’s your luscious locks or your pet’s fur, hair in the shower drain is inevitable. But here’s the good news: removing hair from your shower drain doesn’t have to be a gross, time-consuming ordeal. With a few easy techniques and tools, you can unclog that drain in no time and keep the water flowing as it should. Let’s dive into how to easily remove hair from your shower drain so you can get back to those uninterrupted, relaxing showers.
Why Does Hair Clog Drains So Easily?
Before we get into the nitty-gritty of how to easily remove hair from your shower drain, it helps to understand why hair is such a frequent offender when it comes to clogs.
Here’s the deal: hair is naturally sticky. When you wash your hair in the shower, strands fall out, mix with soap, shampoo, and oils, and form a tangled mess. Over time, this sticky mess gets stuck on the sides of the drain pipe, and as more hair accumulates, it creates a blockage. Add in the fact that water and soap scum can cause the hair to mat together, and it’s no wonder your drain becomes clogged.
Now, let’s get to the solutions!
How to Easily Remove Hair from Your Shower Drain
There are several ways to remove hair from your shower drain, ranging from simple DIY tricks to handy tools designed specifically for this purpose. Here’s a step-by-step breakdown of your options, from least invasive to most thorough.
1. Use Your Hands (Yes, Really!)
Okay, let’s start with the obvious one. Sometimes, all it takes to remove hair from your shower drain is a little bravery and a pair of gloves.
Step 1: Put on a pair of rubber gloves. You’re dealing with wet hair and soap scum here—trust me, gloves are your best friend.
Step 2: Remove the drain cover. Most shower drains have a cover that can be unscrewed or popped off with a screwdriver or a small tool.
Step 3: Reach into the drain and pull out any visible hair. You might be surprised (or disgusted) by how much you can grab with your hands alone.
While this method is simple, it’s not the most pleasant. But if the clog isn’t too severe, it can be a quick and effective fix.
2. Use a Drain Snake or Hair Removal Tool
If you’d rather not reach in with your hands—or if the clog is further down the drain—then a drain snake or hair removal tool can be a lifesaver. These flexible, thin tools are designed to navigate your drain and pull out hair and gunk with ease.
Step 1: Purchase a drain snake or a hair removal tool. These are widely available at hardware stores or online, and they’re typically inexpensive.
Step 2: Remove the drain cover and insert the snake or tool into the drain. Twist or move it around to catch hair and debris.
Step 3: Slowly pull the tool back out. You should see hair tangled around the end. Repeat if necessary.
This method is great because it gets deeper into the drain than your hands can, making it more effective for larger clogs.
3. The Baking Soda and Vinegar Method
If you’re a fan of eco-friendly cleaning solutions, then the baking soda and vinegar method is for you. This classic DIY trick not only helps break down hair but also tackles soap scum buildup in the drain.
Step 1: Pour 1 cup of baking soda down the drain.
Step 2: Follow it up with 1 cup of white vinegar. You’ll notice a fizzing reaction—this is good!
Step 3: Let the mixture sit for about 15-30 minutes to work its magic.
Step 4: Flush the drain with boiling water to clear away any loosened hair and debris.
While this method might not work on stubborn clogs, it’s perfect for keeping your drain clean and reducing minor blockages over time.
4. Use a Plunger
For hair clogs that are particularly stubborn, a plunger can help dislodge the blockage by creating suction in the drain.
Step 1: Remove the drain cover and place the plunger over the drain.
Step 2: Add a little water to the shower (just enough to cover the bottom of the plunger) to help create a seal.
Step 3: Push down on the plunger and pull up sharply to create suction. Repeat several times.
Step 4: Check to see if the water starts draining properly. If not, you may need to try a combination of methods, like using a drain snake afterward.
Plungers are a classic tool for unclogging drains, but keep in mind they work best when the clog is near the top of the drain.
5. Chemical Drain Cleaners (Use Sparingly)
While it’s best to avoid using chemical drain cleaners regularly, they can be helpful in emergencies when other methods don’t work. Be cautious, though—these cleaners contain harsh chemicals that can be damaging to your pipes if used too often.
Step 1: Choose a liquid drain cleaner specifically designed for hair clogs.
Step 2: Follow the instructions carefully, pouring the recommended amount into the drain.
Step 3: Let it sit for the recommended time, typically around 15-30 minutes.
Step 4: Flush the drain with plenty of water to clear away the dissolved hair and chemicals.
Remember, chemical drain cleaners are a last resort—they’re tough on hair clogs but can be rough on your plumbing too.
Preventing Hair Clogs in the Future
Now that you know how to easily remove hair from your shower drain, let’s talk prevention. After all, keeping hair out of the drain in the first place is much easier than dealing with a clogged drain.
1. Use a Drain Hair Catcher
One of the simplest and most effective ways to prevent hair from clogging your drain is to use a hair catcher. These small, inexpensive devices sit over or inside the drain and trap hair before it goes down the pipes.
Pro Tip: Clean the hair catcher regularly (about once a week) to prevent buildup.
2. Brush Hair Before Showering
If you have long hair, try brushing it before you hop into the shower. This removes any loose strands, so they don’t end up going down the drain.
3. Run Hot Water After Showering
After each shower, run hot water down the drain for about 30 seconds. This helps flush out any hair and soap scum before it has a chance to build up.
4. Regular Drain Maintenance
Every month or so, use the baking soda and vinegar method to keep your drain clean and free of buildup. It’s an easy, natural way to maintain your pipes and reduce the chances of future clogs.
Conclusion
And there you have it! Now that you know how to easily remove hair from your shower drain, you can tackle that clogged drain without breaking a sweat. Whether you prefer a hands-on approach or a trusty drain snake, there’s a method for everyone. Just remember, regular maintenance and prevention are the best ways to keep your drains flowing freely. So, next time you see water pooling at your feet, you’ll know exactly what to do—and maybe even stop the problem before it starts. Happy showering!
Read next: How to Unclog a Shower Drain: Easy Step-by-Step Guide
Frequently Asked Questions
1. Can I use bleach to dissolve hair in the drain?
While bleach can help with minor clogs, it’s not as effective as other methods like a drain snake or chemical drain cleaner. Plus, bleach isn’t great for your pipes or the environment, so it’s best to avoid it.
2. How often should I clean my shower drain?
It’s a good idea to clean your shower drain once a month to prevent buildup, especially if you have long hair or pets.
3. What’s the best tool for removing hair from a drain?
A drain snake or hair removal tool is the most effective at pulling out hair clogs, especially if they’re further down the drain.
4. Can a hair clog cause serious damage to my pipes?
If left untreated, hair clogs can lead to slow drainage and eventually cause more significant blockages. While it’s not likely to cause permanent damage, ignoring a clog can lead to bigger plumbing issues down the line.
5. Are chemical drain cleaners safe for all pipes?
Chemical drain cleaners can be harsh on older pipes, especially if used frequently. Use them sparingly, and consider more eco-friendly options whenever possible.